DJI Phantom 4 PRO RTF Kit - DJIP4PRO
This item ships exclusively to the following countries: Germany, Austria, Luxembourg. Please contact us via email for a price estimate if you live outside of these countries.
The Phantom 4 Pro from DJI boasts a 3-axis-stabilized gimbal camera with a 20MP, 1" CMOS sensor capable of shooting up to 4K/60fps video and well as photo bursts at up to 14 fps. The hull has been updated from the previous Phantom 4, now featuring magnesium alloy construction for increased rigidity and reduced weight. The FlightAutonomy system adds dual rear-vision sensors plus infrared sensing for a total of five directions of obstacle sensing and four directions of obstacle avoidance. Gimbal Camera with 1" CMOS Sensor The onboard camera features a first for the Phantom line: a 1-inch 20-megapixel CMOS sensor. A custom-engineered lens made up of eight elements is arranged in seven groups. The camera boasts a mechanical aperture that eliminates rolling shutter distortion that can occur when taking images of fast moving subjects or when flying at high speed and a mechanical focus. 1" CMOS Sensor Sensor size is often more important to image quality than the number of pixels, because a larger sensor has dynamic range, better signal-to-noise ratio, and boosted low light performance. The 1" 20MP CMOS sensor in the Phantom 4 Pro is almost four times the size of the Phantom 4's 1/2.3" sensor. It uses larger pixels and has a maximum ISO of up to 12,800 as well as increased contrast. H.264 and H.265 4K Video Recording Powerful video processing supports H.264 4K videos at 60 fps or H.265 4K at 30 fps, both recorded in a 100 Mbps bitrate. Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for manipulation in post-production. Production-Optimized 4K An enhanced video processing system allows video to be captured in cinema- and production- optimized DCI 4K (4096 x 2160) at 60 fps and a bitrate of 100 Mbps. The Phantom 4 Pro also supports the H.265 video codec at 30 fps in 4K resolution. For a given bitrate, H.265 doubles the amount of image processing as H.264, resulting in significantly enhanced image quality from a more efficient compression. Record in the high dynamic range D-log mode to make the most of this image data for color grading. High Resolution Lens The Phantom 4 Pro camera has an aerial-optimized f/2.8 wide-angle lens with a 24 mm equivalent focal length. It features eight elements — two aspherical — arranged in seven groups that fit into a smaller, more compact frame. Its images are consistently detailed with low distortion and low dispersion, ensuring that photos and videos are sharp and vivid. Mechanical Shutter Capturing objects moving at high speed has always been a challenge for flying cameras using an electronic shutter. This is why the Phantom 4 Pro is the first DJI Phantom to use a mechanical shutter and a large-aperture prime lens. A maximum mechanical shutter speed of 1/2000-second eliminates motion blur and "jello effect" caused by shooting a fast moving object with a rolling electronic shutter. The electronic shutter has also been improved with a max shutter speed of 1/8000-second, and a there is Burst Mode shoot capable of shooting 14 fps at 20 megapixels to catch the perfect moment. Remote Controller with Lightbridge HD Video Link The Phantom 4 Remote Controller Included controller integrates an upgraded Lightbridge HD video transmission system that adds 5.8 GHz transmission support. The ability to choose between 2.4 GHz and 5.8 GHz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4 GHz frequency use. Normally, Wi-Fi video transmission systems use a 2.4 GHz frequency to work with a controller using a 5.8 GHz frequency, as this prevents interference that can occur when both use the same frequency. Lightbridge HD Video Link The Lightbridge HD video transmission system used in the Phantom 4 Pro uses TDM (Time Division Multiplexing) to transmit signals, allowing it to send controller signals and receive video transmission signals at the same frequency. As the 2.4 GHz frequency band is often affected by Wi-Fi, 4G cell towers, and other types of interference in urban areas, a 5.8 GHz band will increase transmission reliability. When switched on, the Phantom 4 evaluates local signal levels, automatically choosing the transmission frequency with the lowest level of interference. This enables a maximum video transmission range of 4.3 miles. Intelligent Flight Modes Draw With Draw, simply draw a route on screen and the Phantom 4 Pro will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios: Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight. Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight. ActiveTrack Following fast-moving objects can be very challenging, but advanced, image-recognition...
Warranty, Item Condition and Damaged on Arrival Product Returns
The condition of this item is new.
This product comes with a 24 month warranty for most products; with the exceptions being a 12 month warranty for waterproof cameras, action cameras, instant cameras, camera light meters, camera flashes, mobile phones, tablet pcs, computers, smartwatches, fitness watches, fashion watches, RC toys, audio items, music equipment, game consoles, gaming keyboards, PS4s, car camcorders, memory cards, home appliances, personal care items, external hard, drives, computer accessories; a 6 month warranty for waterproof cases, camera lens filters, flash remotes; a 3 month warranty for RC toy batteries; and a 1 month warranty for camera accessories, mobile and tablet accessories, computer accessories, games, gaming controllers, audio cables, card readers and rechargeable batteries., which is honored by the manufacturer. You may wish to increase your warranty period for additional peace of mind by purchasing one of our Mack Warranties, or if it is one of the few not stocked by us you can purchase that particular warranty directly from Mack.
If your product arrives damaged or defective you must return it to us. The period for notifying Cameraverse that this product is damaged or defective and needs to be returned, is SEVEN DAYS from when the item is delivered to you. The notification MUST be done in writing through sending an email to email@example.com, and MUST include ALL of the required information clearly laid out in our RETURNS POLICY. Unfortunately, we will not be able to accept any returns of damaged or defective products if ALL of this information is not sent to us within this time period. Please be sure that you receive and check your items yourself or if someone else is receiving your goods for you then it is important that they check the order within this time period. DOA items must arrive at the warehouse specified in the given shipping address within 12 days of receiving the authorization code for the return. Customers can also change their minds and return a product despite it being in good working condition provided that we are notified within 7 days and the item arrives at the given shipping address within 12 days of the customer receiving authorization for the return. For change of mind items a restocking fee of 20% of item value will be charged, up to a maximum of €60. Change of mind items are refunded with store credit, though for most items a cash refund can also be requested, for which we charge a flat rate administrative fee of €20.